VW ID.3 ID.4 / Audi Q4 e-tron 2019–2024 Steering Tie Rod Outer Ball Joint 1EA423811B
VW ID.3 ID.4 / Audi Q4 e-tron 2019–2024 Steering Tie Rod Outer Ball Joint 1EA423811B
VW ID.3 ID.4 / Audi Q4 e-tron 2019–2024 Steering Tie Rod Outer Ball Joint 1EA423811B
Click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Fast Delivery

    Estimated delivery: 7–15 business days

VW ID.3 ID.4 / Audi Q4 e-tron 2019–2024 Steering Tie Rod Outer Ball Joint 1EA423811B

2 8
APS-5311
In stock
Tie Rod End
$304.00
Product overviewSharp, predictable steering depends on tight joints between the rack and the wheels. This replacement...
$304.00

customers are viewing this product
VW ID.3 ID.4 / Audi Q4 e-tron 2019–2024 Steering Tie Rod Outer Ball Joint 1EA423811B

Product overview

Sharp, predictable steering depends on tight joints between the rack and the wheels. This replacement steering tie rod outer ball joint is listed for Volkswagen ID.3 and ID.4 models and the Audi Q4 e-tron range, with OE-reference numbers 1EA423811B, 1EA423811BS1 and 1ED423811A. If your car has developed a clunk when turning, wanders on the motorway or fails a roadworthy or WOF inspection for steering play, a worn tie rod end may be the cause.

Vehicle compatibility

The listed fitment table includes 22 variants:

  • VW ID.3 from 2019: 1st, Pure, Pro, Pro S, GTX and GTX Performance (E11/E12)
  • VW ID.4 from 2020: Pure, Pure Performance, Performance and GTX
  • Audi Q4 e-tron from 2021: 35, 40, 45 quattro, 50 quattro
  • Audi Q4 Sportback e-tron from 2021: 35, 40, 50 quattro

Key features

  • New outer tie rod ball joint for MEB-platform electric vehicles
  • Listed for both left- and right-hand positions
  • Built to OE-reference dimensions for direct replacement
  • Sold individually so you can replace one side or both

Fitting new joints on both sides at the same time helps keep steering feel even from left to right.

Technical specifications

Part type Steering tie rod outer ball joint
OE references 1EA423811B, 1EA423811BS1, 1ED423811A
Position Left / right
Condition New
Sold per Piece
Approx. packed dimensions 20 x 15 x 15 cm
Approx. packed weight 0.3 kg

Installation requirements

Before removal, mark or measure the position of the old tie rod end on the inner rod so toe can be roughly preserved. Use a suitable ball joint splitter rather than hammering the knuckle. As this is a steering component, fitting by a qualified technician and a full wheel alignment afterwards are strongly recommended.

Fitment checks before ordering

This listing shares part numbers with our boxed ID.3/ID.4 tie rod end. Please confirm the OE number on your existing joint, or send us your VIN, so we can make sure the correct part is supplied for your vehicle and production date.

Package inclusions

1 x outer tie rod end. Castle nut, split pin or self-locking nut are not included unless stated.

Shipping information

Shipped from China to customers in Australia and New Zealand. Freight is calculated at checkout based on your delivery address, and actual freight is confirmed at the time of order.

Special Order Item

This product is a special-order item sourced specifically for your vehicle. Please allow an estimated lead time of 3-4 weeks for sourcing and delivery. Lead times are estimates and may vary depending on supplier availability, order processing, and international shipping. We recommend confirming availability before placing your order.

Read More
Read Less

Your cart

×